<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>热处理论坛 - 〖钢管与管件热处理〗</title>
    <link>https://rclbbs.com/forum-45-1.html</link>
    <description>Latest 20 threads of 〖钢管与管件热处理〗</description>
    <copyright>Copyright(C) 热处理论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 17 May 2026 02:15:56 +0000</lastBuildDate>
    <ttl>120</ttl>
    <image>
      <url>https://rclbbs.com/static/image/common/logo_88_31.gif</url>
      <title>热处理论坛</title>
      <link>https://rclbbs.com/</link>
    </image>
    <item>
      <title>钻杆淬火后弯曲度较大</title>
      <link>https://rclbbs.com/thread-614807-1-1.html</link>
      <description><![CDATA[钻杆管体淬火后，到淬火机床，弯管较多，和壁厚不均有关系吗？淬火温度880左右，小规格的弯管特别多！如外径60.3  ……热处理后墩粗过渡带的位置，做探伤检测总是有磁痕显示不合格！]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>lzq815</author>
      <pubDate>Sun, 15 Jun 2025 04:39:15 +0000</pubDate>
    </item>
    <item>
      <title>45#无缝钢管球化组织</title>
      <link>https://rclbbs.com/thread-614450-1-1.html</link>
      <description><![CDATA[请教各位老师，这是冷拔的无缝钢管，请问球化怎么样，是过热还是欠热？]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>钢铁金相</author>
      <pubDate>Fri, 30 May 2025 11:08:50 +0000</pubDate>
    </item>
    <item>
      <title>请老师看一下，这个异常带状组织是马氏体还是贝氏体，谢谢。</title>
      <link>https://rclbbs.com/thread-613839-1-1.html</link>
      <description><![CDATA[材料为N80-1油管钢，生产工艺为在线常化，控冷温度540-560℃，带状组织处平均硬度在630HV左右，并且由EPMA结果看，带状组织处存在Mn和Si的偏析，我判断为马氏体，但不能确定，请各位老师解答，谢谢。 ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>拾雨</author>
      <pubDate>Wed, 07 May 2025 06:23:49 +0000</pubDate>
    </item>
    <item>
      <title>钢管球化退火碳势</title>
      <link>https://rclbbs.com/thread-606672-1-1.html</link>
      <description><![CDATA[无缝钢管真空球化退火中，用的氮气作保护气，但是监控的是碳势。但是有以下几个问题没弄懂1、为什么设置碳势是1000Mv,但是实际只能到850Mv左右。2、如何根据碳势算炉内气氛的含碳量？（脱碳很严重，到0.30mm了）
，有没有大佬能解答一下 ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>千古一帝</author>
      <pubDate>Tue, 03 Sep 2024 23:47:10 +0000</pubDate>
    </item>
    <item>
      <title>求教304管子晶间腐蚀试验不合格原因，求解答谢谢了</title>
      <link>https://rclbbs.com/thread-583140-1-1.html</link>
      <description><![CDATA[不锈钢304
38*2.5的管子，工艺是光亮固溶（感应加热设备）之后金相试验中晶间腐蚀不合格，想问一下什么原因
样品2号和3号不合格 （2号样品外壁不合格，3号样品内壁不合格）
2号样品热处理工艺：加热温度1060-1080，保温温度1060，退火速度2.5米/分钟，保温时间1.2分钟， ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>cmmxin1234</author>
      <pubDate>Sat, 13 Jan 2024 15:26:59 +0000</pubDate>
    </item>
    <item>
      <title>09CrCuSb无缝钢管表面发白</title>
      <link>https://rclbbs.com/thread-309349-1-1.html</link>
      <description><![CDATA[钢管表面发白，发花，热处理工序要注意点什么，怎么改进。钢管是880 度正火处理，空冷。钢管表面退火出来后发现不了，矫直去除氧化皮后再能发现。求大神建议。]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>youaotian</author>
      <pubDate>Sat, 23 Jul 2022 05:09:55 +0000</pubDate>
    </item>
    <item>
      <title>TU2铜盘管退火后拉伸后，成品延伸率不足，怎么解决</title>
      <link>https://rclbbs.com/thread-308813-1-1.html</link>
      <description><![CDATA[TU2铜盘管退火后拉伸后，成品延伸率不足，怎么解决？退火温度和保温时长怎么调整？]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>lei1210131001</author>
      <pubDate>Sun, 24 Apr 2022 08:17:30 +0000</pubDate>
    </item>
    <item>
      <title>钢管感应加热淬火后，同批次管件表面呈现不同的颜色。</title>
      <link>https://rclbbs.com/thread-308512-1-1.html</link>
      <description><![CDATA[请教各位前辈，我司目前生产了一批钢管并进行了淬火。材质：BR1500HS，淬火方式：连续感应加热淬火，淬火机台内无保护气氛，只淬火不回火。连续生产过程中发现，同批次的管件，在同等条件下，淬火后的管件呈现不同的颜色，有灰白色、蓝色。查资料显示金属表面被氧化了， ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>WYQ666</author>
      <pubDate>Wed, 23 Feb 2022 06:46:25 +0000</pubDate>
    </item>
    <item>
      <title>12Cr1MoVG钢管抗拉强度不够</title>
      <link>https://rclbbs.com/thread-308484-1-1.html</link>
      <description><![CDATA[连续热处理炉合金钢正回火，出料口没有强风冷等冷却设备，空冷。对于5mm壁厚以上的管子抗拉强度一直在下限，是否是因为冷却速度没达到，在没有强风冷的前提下如何解决？大神们，给个意见。 ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>youaotian</author>
      <pubDate>Fri, 18 Feb 2022 01:29:35 +0000</pubDate>
    </item>
    <item>
      <title>钢管在线线圈加热金相组织为啥不行</title>
      <link>https://rclbbs.com/thread-308483-1-1.html</link>
      <description><![CDATA[该图片为在线线圈热处理的金相，抗拉强度和延伸都符合国标，但是金相组织不行。加热线圈长度一米。请问各位大神，是否是因为加热和保温时间不够引起的？]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>youaotian</author>
      <pubDate>Fri, 18 Feb 2022 01:24:50 +0000</pubDate>
    </item>
    <item>
      <title>有一批钻杆调质后发现“淬火裂纹”只有管体中间位置存在什么原因？</title>
      <link>https://rclbbs.com/thread-308287-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>czdrxiao</author>
      <pubDate>Sun, 09 Jan 2022 04:13:13 +0000</pubDate>
    </item>
    <item>
      <title>5毫米厚壁65MN钢管，长度200毫米，如何获取下贝式体组织</title>
      <link>https://rclbbs.com/thread-306864-1-1.html</link>
      <description><![CDATA[项目：我公司目前手上有一批活。长度200毫米，外径25毫米，壁厚5毫米的65MN材质钢管，现在用连续式网带炉，淬火介质硝盐。  
淬火以后需要得到：500-560HV30的硬度，组织要是下贝氏体。 

目前遇到的困难： 现在等温淬火以后现在两头的硬度达到。 中间（指的是总长度200 ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>1104225483</author>
      <pubDate>Mon, 22 Feb 2021 04:59:24 +0000</pubDate>
    </item>
    <item>
      <title>《钢铁连铸、再热、轧钢温度监测方案》</title>
      <link>https://rclbbs.com/thread-305316-1-1.html</link>
      <description><![CDATA[连铸


在连续铸造过程中，钢水首先被铸成厚板、钢锭或方坯，生产出现问题可能导致整个工厂速度变慢，甚至停产。准确实时的温度监测，再结合调节水喷嘴和水流速功能，可实现正确冷却，有助于保证金属特性，提高产品质量，延长设备使用寿命。

在有粉尘，水雾或烟汽遮挡 ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>baomingguan</author>
      <pubDate>Mon, 06 Jan 2020 08:08:56 +0000</pubDate>
    </item>
    <item>
      <title>A182 F22V 材质管件应该做什么热处理？得到什么组织算合格的呢？求助。</title>
      <link>https://rclbbs.com/thread-303441-1-1.html</link>
      <description><![CDATA[如题，最近公司接到一批 A182 F22V 材质管件订单，厚度在28mm～55mm不等，标准上有正火+回火，和淬火+回火， 我们想先做下试验，请问哪位知道我们先按照哪个工艺处理较好？ 处理后的金相组织  是什么组织最好。谢谢！ ...]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>yuchen002</author>
      <pubDate>Wed, 26 Dec 2018 01:21:40 +0000</pubDate>
    </item>
    <item>
      <title>30Mn2处理P110头尾性能差异大</title>
      <link>https://rclbbs.com/thread-302899-1-1.html</link>
      <description><![CDATA[30Mn2处理P110   管头管尾性能差别巨大   尾部屈强比偏小（屈服强度不合格 小于758   抗拉强度合格大于862）]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>liuhongwei13</author>
      <pubDate>Thu, 13 Sep 2018 08:48:02 +0000</pubDate>
    </item>
    <item>
      <title>油管60.3*4.83热处理后不好取冲击样</title>
      <link>https://rclbbs.com/thread-302126-1-1.html</link>
      <description><![CDATA[请教大侠，油管60.3*4.83热处理后不好取冲击样，标准要求不需进行试验，但要采用文件化的并经证明其冲击吸收能满足或者大于规定最低要求的化学成分和工艺，这具体怎么来做啊，谢谢]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>ocean8003</author>
      <pubDate>Wed, 25 Apr 2018 14:17:08 +0000</pubDate>
    </item>
    <item>
      <title>钢管除油工艺</title>
      <link>https://rclbbs.com/thread-254964-1-1.html</link>
      <description><![CDATA[请问下大家 钢管冷轧后是怎么除油的 有没有什么好的除油工艺 能不能具体说下]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>yyw972</author>
      <pubDate>Sat, 21 Jan 2017 02:30:28 +0000</pubDate>
    </item>
    <item>
      <title>T152  Tube是什么材料？</title>
      <link>https://rclbbs.com/thread-254893-1-1.html</link>
      <description><![CDATA[如题：请问T152  Tube是什么材料？
可能是美标的钢管。]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>qdmjg</author>
      <pubDate>Tue, 03 Jan 2017 05:53:12 +0000</pubDate>
    </item>
    <item>
      <title>组织判定</title>
      <link>https://rclbbs.com/thread-254563-1-1.html</link>
      <description><![CDATA[大家看看WB36这个组织怎么样？是什么组织？合格吗？]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>yyw972</author>
      <pubDate>Sat, 12 Nov 2016 08:42:15 +0000</pubDate>
    </item>
    <item>
      <title>我们这个产品球阀模锻件要热处理吗？请教师傅们！</title>
      <link>https://rclbbs.com/thread-243779-1-1.html</link>
      <description><![CDATA[卡套球阀，焊接球阀！]]></description>
      <category>〖钢管与管件热处理〗</category>
      <author>张学勇-HaoLiu</author>
      <pubDate>Tue, 28 Jun 2016 06:14:35 +0000</pubDate>
    </item>
  </channel>
</rss>